Make Your Industrial Purchase Cheaper, Faster, Easier, and Better
伊伊西科技(北京)有限公司
EEC TECHNOLOGY (BEIJING) CORP., LTD

  Hot Line

  +86 134 6671 4221​

P
Hot Search: CK-625, CCGS, CWM-75L, TV1547, 9T94A, ITL12-1, FN1000, GM2200, DA7250, IM9500 ...
P​​
                     
               
CURRENT LOCATION:​​​
 产品中心​TECH 
EUT-132 32-channel digital ultrasonic flaw detector

EUT-132 32-channel digital ultrasonic flaw detector

EUT-132 32-channel digital ultrasonic flaw detector adopts the most advanced aerospace electronic technology and the design concept of multi-CPU system to ensure the consistency, stability, reliability of each channel, as well as the field anti-interference ability of the whole machine. It has the advantages of high sensitivity, high resolution and high fidelity echo transmission, and can be connected 24 hours. Continuation of work. It is most suitable for automatic or semi-automatic ultrasonic flaw detection of steel tube, bar and billet, especially for thick-walled steel tube with thickness of more than 100 mm.

0.00
0.00
  
商品描述

EUT-132 32-channel digital ultrasonic flaw detector adopts the most advanced aerospace electronic technology and the design concept of multi-CPU system to ensure the consistency, stability, reliability of each channel, as well as the field anti-interference ability of the whole machine. It has the advantages of high sensitivity, high resolution and high fidelity echo transmission, and can be connected 24 hours. Continuation of work. It is most suitable for automatic or semi-automatic ultrasonic flaw detection of steel tube, bar and billet, especially for thick-walled steel tube with thickness of more than 100 mm.




1. It can be used for automatic or semi-automatic ultrasonic inspection of steel tube, bar and billet. It is mainly used for high sensitivity automatic inspection of large diameter and thick wall seamless steel tube (especially over 100mm).

2. 32 channels: 16 channels as transverse flaw detection, 10 channels as longitudinal flaw detection, and 6 channels as thickness measurement function. Specific realization can also be based on demand self-sufficiency

3. The instrument adopts man-machine interface, which is clear, easy to understand and easy to operate. It has the function of ultrasonic flaw detection/thickness measurement/layered imaging.

4. 32 Channel A Data Wave Display Area and 32 Channel Simulated Display (Flaw Detection/Thickness Measurement/Layering)

5. Random matching software can detect and image the collected signals, record them, call them back, analyze them or generate reports and print them.

6. Ultrasound testing parameters, graphics and files can be stored in the computer hard disk and called at any time.

7. The computer management of the results of flaw detection process can be realized by scanning data transmission through network ports and desktop computers or similar instruments, and then by supporting computer imaging display and processing software.

8. The instrument has high repetition frequency, high detection sensitivity, high sampling rate and high-speed data transmission capability, so it can not only realize high-speed detection of medium and thin-walled steel tubes, but also carry out high-sensitivity detection of thick-walled steel tubes. It has a wide range of applications.

9. Sensitivity consistency between channels is good, 24-hour continuous operation is stable and reliable, site installation, debugging and flaw detection are quite simple.

10. The instrument is equipped with an I/O interface for external alarm output, delayed marking output and mechanical equipment related signal input (e.g. encoder signal input, feed signal input). The output signal is 5VTTL level signal; the input signal should be 3.3V-5V level signal. Specific input and output signals can be added or subtracted according to different needs of users.

11. The rapid development of computer technology further provides the signal processing speed of the instrument. Compared with the original instrument, the detection frequency range is wider, the compatibility of the probe is better, the storage capacity is larger, the intelligent degree is higher, and the interface design is more reasonable.












● Size:482*452*177*2mm
● Power:100~240VAC
● Transmitted Pulse:Tine Pulse Amplitude Up≥500V,tr≤15ns
● Damping: 50/500Ω
● Repetition frequency (PRF) 25Hz~10KHz, multi-rang regulating available
● Detection range: 5~5000mm (longitudinal wave of steel), adjustable continuously,minimal display range of 5mm
● Shift in pulse: -10~1000mm (longitudinal wave of steel)
● Material Velocity:1000~15000 m/s
● Frequency: 0.5~15MHz. Broadband / narrow band optional
● Gain:0~110dB,with 0.5/1/2/6dB step
● Attenuation Error:No more than ±0.1dB in each 2dB
● Vertical Linear Error:≤3%
● Horizontal Linear Error:≤0.5%
● Detect sensitivity margin:≥63dB
● Far field resolution:≥30dB
● Sampling Rate: 200MHz


















1. AUTOMATIC OR SEMI-AUTOMATIC ULTRASONIC DETECTION FOR PIPE, BAR AND INGOT BILLET IN STEEL PLANT

2. Suitable for automatic flaw detection and thickness measurement of large diameter thick-walled seamless steel tube with high sensitivity









Send Inquiry​​