EEC-2004 Intelligent Multifunctional Electromagnetic Testing System is a new generation of non-destructive testing equipment
EEC-2004 Intelligent Multifunctional Electromagnetic Testing System is a new generation of non-destructive testing equipment
1. With eddy current testing technology, metal magnetic memory testing technology, magnetic flux leakage testing technology, far-field eddy current testing, low-frequency electromagnetic technology and digital electronics technology and computer processing technology as a whole.
2. The equipment adopts the most advanced micro-computer technology, DSP technology and SMT technology. It has stable and reliable performance, high signal-to-noise ratio, real-time testing of metal material defects, distinguishing alloy types and heat treatment conditions, and diversification of effective thickness measurement. It is a useful, digital, multi-functional and portable electromagnetic equipment.
● With the probe automatic calibration function● Digital filter● Auto/manual amplitude and phase measurement● Unequal phase/amplitude alarm● Impedance plane and strip curve displays● Online operation, prompt with hotkey help● Parameter, graphic data can be transferred between the same type equipment or microcomputer● Graphics and parameter can be stored, replayed and analyzed
Magnetic Memory Detecting:Channel: 8Minimum measurement distance: 1mmMaximum measurement distance: 150mmMaximum scanning speed: 0.5m per secEddy Current/Remote-Field Detection:Frequency range: 64Hz~5MHz (RFT and ELF:5Hz~5KHz)2 individual optional frequencies (can be extended to 8 frequencies)3 mixing unit (mixing automatically)Phase rotation: 0~359°,with step of 1°Magnetic Flux Leakage(Low Frequency Electromagnetic Detecting):Channel: 8Range of gain: 0~90dB with step of 0.5dBHigh-pass filter: 0~500HzLow-pass filter: 10Hz~10KHzOther technical indicators:Microprocessor: 16 (table 32)Memory: 128M (table 320G)The memory capacity: 16M (table 2G)TFT color screen/ High-light EL screen: EL 320x240Internal power supply: 14.8V 4AH lithiem batteryExternal power supply: AC 220VRange of operating temperature: -25 ℃ - +60 ℃
● Early diagnostic for component fatigue damage by detecting stress concentration.● In-service, on-line, off-line inspection of seamless and welded pipes.● Widely used for the inspection of heat exchanger tubing and chillers.● Well used for automatic testing of various components and parts, such as blade, wheel hub, gear, bolt hole, auto part, aircraft components etc.● Sorting of materials, heat treatment condition, hardness etc.