1. Use of special transformer for UV equipment: mainly used in UV coating equipment, UV curing machine, UV printing machine, UV dryer, etc.
2. The four-piece UV light source is generally composed of four parts: UV transformer, UV lamp, UV capacitor and lampshade.
1. Use of special transformer for UV equipment: mainly used in UV coating equipment, UV curing machine, UV printing machine, UV dryer, etc.
2. The four-piece UV light source is generally composed of four parts: UV transformer, UV lamp, UV capacitor and lampshade.
UV equipment special transformer technical parameters
Capacity
1KVA-60KVA
Voltage level
AC3000V and below
Input voltage
Rated voltage ±10%
Insulation resistance
DC 500V≥100MΩ
Output voltage
Rated voltage within ±3℅ within the load range
Insulation class
H class
Frequency
50Hz/60Hz fixed
Ambient temperature
—15°C--+50°C
Dielectric strength
3500V/10mA/60s
Relative humidity
<95℅
Load performance
UV equipment
Temperature rise
<100K
Waveform distortion
Output without additional waveform distortion
Noise
<55db
Specification model
Model
Rated Capacity
Rated input
Rated output
Reference Size
Reference weight
(KVA)
Line/phase voltage(V)
Line/phase voltage(V)
Width X deep X height(mm)
(KG)
single-phase
UVB-1
1
AC660V
And below
AC3000V
And below
165×140×140
12
UVB-2
2
200×130×210
16
UVB-3
3
200×140×210
18
UVB-5
5
210×170×280
28
UVB-8
8
210×190×300
36
UVB-10
10
210×220×300
43
UVB-12
12
240×170×380
47
UVB-15
15
250×180×380
55
UVB-20
20
250×220×380
77
UVB-25
25
250×230×440
100
UVB-30
30
250×230×550
120
UVB-40
40
260×250×550
140
UVB-50
50
330×240×550
170
UVB-60
60
330×280×550
210
Note: The above is a regular model, EECTECH can customize special specifications according to customer requirements.
For more information, please contact EECTECH
1. UV special transformer is a dry type transformer which is used in special occasions by the principle of magnetic flux leakage. The product has the characteristics of stable performance, fast startup, low noise, low heat, high efficiency and energy saving. The product adopts imported ultra-thin silicon steel sheet and vacuum dipping process. The wire is made of high quality oxygen-free copper enameled wire and uses Class H insulation material, which greatly improves product quality, safety and service life. Can be used with imported equipment UV light source, dedicated to UV glazing, UV curing, PS printing and so on. Transformer styles are vertical and horizontal, with power ranging from 1KW to 60KW.
2. The main points of this series of transformers: the working current, voltage and diameter of the lamp are determined. The transformer parameters are scientifically matched with the lamp parameters to achieve high-efficiency output of ultraviolet rays and to extend the service life. It is worth noting that the lamp, transformer and capacitor are a complete matching system. The choice of the transformer must match the power and voltage of the UV lamp. The transformer must have sufficient output voltage to ensure that the UV lamp can work at full load; If the output voltage is too high, the lamp will burn out, the output voltage will be too low, and the lamp will not work at full power, which will make the UV output intensity insufficient.
3. EECTECH's UV special transformer is strictly produced in accordance with JB/T8750-1998 electrical control equipment transformer standard. Can be used with imported equipment UV light source.
4. Use occasions: The use of special transformers for UV equipment: mainly used in UV coating equipment, UV curing machine, UV printing machine, UV dryer and other UV equipment. The four-piece UV light source is generally composed of four parts: a UV transformer, a UV lamp, a UV capacitor, and a lamp cover.
The normal use conditions of the special transformer for UV equipment are:
1), ambient temperature: -15 ° C - +50 ° C
2), altitude: <3000M
3) Relative humidity: < 95%
4) There are no gases, vapors, chemical deposits, dirt and other explosive and corrosive media that seriously affect the insulation of the transformer.
5) There is no serious vibration or bumps in the installation site.