1.These products are the first selection for the use of high-power and solid-state high-fraquence resonant cireuit.
2.They are particularty suitable for the use of low-votalge great-current solid-state resonant circuit.
1.These products are the first selection for the use of high-power and solid-state high-fraquence resonant cireuit.
2.They are particularty suitable for the use of low-votalge great-current solid-state resonant circuit.
CS-20 type high-frequence resonance capacitors description
1. These products are the first selection for the use of high-power and solid-state high-fraquence resonant cireuit.They have the lower equivalent inductance and resistivity,and their working-frequence extent is very wide(10KHZ-450KHZ),and they can bear a large quantity of electric current (generally over several ten amperes).They are particularty suitable for the use of low-votalge great-current solid-state resonant circuit.
2. Their outermost are the first selection for the use of high-power and solid-state high-frequence resonant circuit.They have the lower equivalent inductance and resistivity,and their working-frequence extent is very wide(10KHZ-450KHZ),and they can bear a large quantity of electric current (generally over several ten amperes).They are particularty suitable for the use of low-uotalge graet-current solid-state resonant circuit.
3. Their outermost electrodes are made of copper plate.According to the cooling ways,they could be made two kinds of condensers,i.e.,indirect and direct water-cooled type.In the small-power solid-state high-frequence source equipments,they could be assembled with the fin force air-cooled structure.
Typical specification model
capacitance ( μF )
The most voltage (vac)
The most bearing circuit (A)
The limit working freguence (KHZ)
The Cool-Type
Size(mm)
(LxWxH)0.22
100
30
500
Indirect water-cooling
65×45×12
0.25
500
100
500
Indirect water-cooling
94×75×75
0.25
400
300
500
Direct water-cooling
110×70×35
0.30
400
350
500
Direct water-cooling
110×70×35
0.33
400
200
500
Indirect water-cooling
80×80×36
0.50
400
500
500
Direct water-cooling
130×70×35
0.65
400
400
500
Indirect water-cooling
80×80×36
0.65
650
600
500
Indirect water-cooling
80×80×36
0.75
400
400
500
Indirect water-cooling
80×80×36
1.00
400
500
500
Indirect water-cooling
80×80×36
1.00
600
600
500
Indirect water-cooling
80×80×36
Note: 1. For exceptions to the above standards, we can customize new products according to customer needs; for more information, please contact EECTECH
2.The most bearing circuit means the limit under the better water-cooled condition.