EECTECH products

Hot Search: 3CX1500A7, 7322, CX1154L, CS-30032, MKMJ, MCMJ, PE140, TB5/2500, JPK-36/074 ...

P

CURRENT LOCATION:

HOME >> Resistors

产品中心TECH

roducts

GRXG Wire-wound Resistor with High Power Aluminum Shell

Wirewound Resistor

List price:0.00

Price:0.00

Suitable for air-cooled installation, used in DC or AC circuit of large military ground equipment
RX84N High Voltage Wire-wound Resistor

High Voltage Resistor

List price:0.00

Price:0.00

1. Used in ±500KV HVDC transmission system for voltage signal acquisition2. Compliance with RoHS, REACH standards
RXS-A/D High Power Water Cooling Resistor

Water Cooling Resistor

List price:0.00

Price:0.00

1. Suitable for small installation space and high power requirements2. IGBT circuits for high-power power power and electronic equipment can be used as capacitive discharge circuits, as well as voltage dividing, shunting and discharge circuits for high-power equipment.3. Small additional inductance, which can be used in medium frequency power electronic circuits
Cement Resistor series

Cement Resistor

List price:0.00

Price:0.00

1. cement resistors are made by winding resistance wires around non-alkaline ceramic core,which is adde with a layer of heat and humidity resistant and non-corrosive protective material.2. The wire wound resistor is then placed in a square ceramic package sealed with special nonflammable heat-resistant cement.3. For high resistance value,wires are replaced by metal oxide films4. Small size,resistant to vibration,humidity and heat.good dissipation,low noise and no annual shift in resistance value,low price.
Milliohm Resistor series

Milliohm Resistor

List price:0.00

Price:0.00

1.Low resistance value,the lowest can be 0.005 and high stability2.Operating ambient temperature:-55 +125℃3.Can be according to customers requirement to form the special type.4.According to mounting requirements, there are 5mm,10mm...etc.5.For custom specifications,please contact us to discuss the details.
Film Resistor series

Film Resistor

List price:0.00

Price:0.00

1.Metal film resistors are made by depositing special treated metal film onto ceramic core in ultra high vacuum.Both ends of the core are plated with precious metal to ensure low noise and small temperature coefficient.2.Film the metal in Vacuum,the surface coating is green(blue）resin with the good waterproof.3. Low noise,resistance to high temperature,low temperature coefficient,high overloadpower,and good high frequency performance.4.Power: 1/8W，1/6W，1/4WS，1/4W，1/2WS，1/2W，1WS，1W，2WS，2W，3WS，3W，5WS5. Conforms to the ROHS standard and the LEAD-FREE non-lead standard.
Blower Motor Resistor series

Blower Motor Resistor

List price:0.00

Price:0.00

1. According to installation environment,the different plastic bottom seat are available for convenience installation.2. The resistor matrix sharps (like round ,flat and square) are different for the installation environment and custom special applications.3. Different resistance is on the same resistor are available.4. Common spec. R25 R30 R69 R24 R36 R565. For non-standard technical requirements and custom special applications, please contact us to discuss the details.
Water Cooling Resistor series

Water Cooling Resistor

List price:0.00

Price:0.00

EECTECH has aluminum box water-cooled resistor, stainless steel water-cooled resistor, brass pipe water-cooled resistor, ceramic pipe water-cooled resistor and so on. Welcome new and old users to negotiate
Adjustable Resistor series

Adjustable Resistor

List price:0.00

Price:0.00

1.Variable BCI may used as a rheostat with two connections,(the wiper and just one end of the track )or as a potentiometer with all three connections in use.2.On one resistor ,can have the different resistance requirement(flat and round wire can be in same rheostat).3. High power rating,resistance to humidity, resistance value in great adjustable range.4.Motor controller also use BCI series as rheostat or potentiometer to control the speed of a by limiting the flow of current through them .
LED Load Resistor series

LED Load Resistor

List price:0.00

Price:0.00

1.Encapsulant: S: Silicone, C: Cement; End caps: Stainless steel.2.Core: Ceramic steatite or alumina.3.Housing: Aluminum with hard anodic coating.4.Element: Copper-nickel alloy, nickel-chrome alloy or manganese copper.
Power Aluminum Resistor series

Power Aluminum Resistor

List price:0.00

Price:0.00

1. An aluminum encased consists of an alloy metal coil-type resistance element assembled into an aluminum enclosure.2.Following high-temperature anodization, the enclosure is filled with a special non-flammable cement paste and after hardening. Insulation is applied through a high temperature process.3.Since this component is embedded in the heat-proof cement, it is not affected by external mechanical force, and dusty environments and extreme duty
wirewound resistor series

Wirewound resistor

List price:0.00

Price:0.00

1.Gray ,green,and black are available.KNP and KNPN 1/2W-5W, marks are ring; KNP and KNPN 5W-30W and KNZ ,marks are letters.2.Low noise, resistance to high temperature, low temperature coefficient,high overload power,surface nonflammable.3.Conforms to the ROHS standard and the LEAD-FREE non-lead standard
Glazed-Wirewound Power Resistor series

Glazed-Wirewound Power Resistor

List price:0.00

Price:0.00

1.Surface glazed,won't be easily polluted or eroded by chemistry gas,high insulating capacity,canresist humidity and heat well,can be used in the atrocious environment.2.Small size,high power rating,good overload and heat durability capacity,the useful time is longer than the others.3.Conforms to the ROHS standard and the LEAD-FREE non-lead standard.
power resistor series

Power resistor

List price:0.00

Price:0.00

EECTECH produce the high power wirewound resistor which including DDR series high power smoothwound resistors and DQR series wave-shape ribbon wound resistors
Braking Resistor series

Braking Resistor

List price:0.00

Price:0.00

1.Good dissipation ,high stability, high power rating,high over load and long life.2. Conforms to the ROHS standard and the LEAD-FREE non-lead standard.
Thick Film non-inductive ultra-high power resistor

Thick Film Power Resistors

List price:0.00

Price:0.00

high power resistors are a new generation of environmental protection technology products, which have the characteristics of thick film, no induction, high power and water cooling. They are made of high strength plastic shell shell shell, clad plate welding, low insulation resistance of radiators, and can maintain 600W power at the center temperature of the bottom die less than 85 C.
High Voltage Resistor series

High Voltage Resistor

List price:0.00

Price:0.00

RIZ High Voltage Resistors: The basic coreismade of high quality eramic, goodheatconduction, bigheatcapacity. RHP High Voltage Resistor: it is thick film, non-inductive, andhigh voltage resistor.The basic core is made of high qualityceramic, good heat conduction, big heat capacity RI82 has two types of band high-voltage resistors: RI82 ribbon high-voltage glass-glazed resistor and RF82 ribbon high-voltage glass-glazed resistor voltage divider.
AC/DC Resistive Load Bank series

AC/DC Resistive Load Bank

List price:0.00

Price:0.00

1.EECTECH load bank is a continuous duty,portable,lightweight load bank that is easily transport,set up and operated by one technician.2.High-power rating,good dissipation heat,low temperature coefficent,long life,suitable for long time load working.3.Small size,great exterior,styles diversification.

< 1 >