EEC-39RFT+8-band and 8-channel eddy current testers are designed with full digital electronic technology, eddy current technology and micro-technology to meet different test requirements.
EEC-39RFT+8-band and 8-channel eddy current testers are designed with full digital electronic technology, eddy current technology and micro-technology to meet different test requirements.
1. It integrates ECT and RFT functions. Eight frequencies help to achieve higher test coverage. High test frequencies can be used for surface detection. Low frequencies are highly sensitive to underground defects with tube-sheet functions.
2. EEC-39RFT+ is widely used in heat exchanger pipes to test defects and measure wall thickness in service (Cu, Ti, Al, Fe, etc.). It is widely used in nuclear power, power, petrochemical, aerospace and other departments. It can suppress the total number of interference signals caused by baffle, indentation, precipitation and cold working by mixing device. Word-based design technology allows users to easily store test data and parameters and read them out for local testing.
● Mixing function to suppress noise signal with certain frequency, like mounting plate
● Tube sheet function to simulate the heat exchanger tubing layout, and to mark the testing status and testing result● Connect with multiplexed probe sensors and test with multiplexed frequencies● With built-in lithium battery which can work for 15 hours per charge● Integrated with eddy current testing, remote field testing● Fast digital / analogue electric balance● Non-equiamplitude phase alarm/amplitude alarm● Automatic/manual amplitude and phase measure● Store large testing data in lap top PC● Real-time memorize multi-track eddy current signal● A-scan display, can be extended to C-scan display.● Digital filtering● Colored real-time display of x-y impedance plane and strip chart signals● With multiple frequency configuration analysis function● Rectangular coordinates and polar coordinates background can be selected
● 8 independent frequencies
● 8 independent channels● 3 automatic mixing units● Frequency range: 5 Hz~5 MHz (5Hz~5KHz for RFT);● Range of gain: 0~90dB with step of 0.5/5dB● Phase rotation: 0~359° with step of 1°● Digital filter: 1-100● High filter: 0Hz-500Hz● Low filter: 10Hz-10KHz● With built-in lithium battery which can work for 15 hours per charge
● In-service, on-line, off-line inspection of seamless and welded pipes.
● Widely used for the inspection of heat exchanger tubing and chillers.● Well used for automatic testing of various components and parts, such as blade, wheel hub, gear, bolt hole, auto part, aircraft components etc.● Sorting of materials, heat treatment condition, hardness etc.