Could replace Alcon FP Capacitor

RS series water cooled resonance power capacitor- B style

10μF, 600VAC

Order code: 106K601A51501

Packing and shipment

For the packing box with capacitor, any kinds of shipment are permitted. But the sprinkle of rain or snow and mechanical damage must be avoided.

Mark

The capacitor is marked by laser print or stamp or adhesive label, With following information:

1.Rated capacitance (10μF)

2.Rated voltage (600V.AC)

3.Tolerance on rated capacitance (J ±5%; K ±10%)

4.Order number of this capacitor (106K601A51501)

5.Manufactured year and week (MFR/DATE)

Cautions and Warnings

(1) The capacitors have not discharge resistors between terminals, so the energy stocked in the capacitor maybe lethal, before handle capacitors please discharge through resistor. Short-circuit the capacitor is not permit.

(2) Check thickness of the connections/terminals periodically.

(3) Do not use or store capacitors in corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. In the dusty environment regular maintenance and cleaning especially of the terminals is required to avoid conductive path between phases.

(4) In case of dents of more than 5mm depth or any other mechanical damage, capacitors must not be used at all.

(5) Don't hesitate to contact us for any doubts and more detail information.

(6) Water cooling method is recommended

Technical Specifications
Capacitance	10μF
Capacitance Tolerance	±10% (k); Optional ±5% (J)
Reactive power	200kVar
Rated Voltage (RMS)	600V.AC
Rated Frequency	18-40kHz
Current (RMS)	500A
Current (Max)	1000A t≤1min (water cooling)
Voltage Change (Dv/Dt)	＞1000V/μs
Equivalent Series Resistance (ESR)	≤1.0mΩ 10KHz
Dissipation Factor	tgδ≤0.0008 (@20℃, 10KHz)
Inductance (Ls)	≤25nH
Operating Temperature	-400C～+850C
Storage Temperature	-400C～+850C
Insulation Resistance	R×C＞5000s (100V, 60S)
Lifetime Expectancy	30,000Hours
Humidity RH	0-95%
Failure Rate	≤100Fit
Reference Standard	IEC61881, IEC61071, IEC60831
Physical and Test Parameters
Test Voltage Between Terminals	1800VDC 10s
Encloser Material	Mylar tape
Internal Insulation	Epoxy resin
Dielectric Medium	Metallized polypropylene film
Max. Torque of Terminal	8 Nm
Cooling Mode	Conduction cooling
Fire Resistance	UL94-V0