Equivalent to Alcon FP Capacitor
RS series resonance water cooled power capacitor
B style - circular/clylinder body with square tops
8.5uF/600Vac/500A(water cooling)
Could replace Alcon FP Capacitor
RS series water cooled resonance power capacitor- B style
8.5μF, 600VACOrder code: 855K601A51501
Packing and shipment
For the packing box with capacitor, any kinds of shipment are permitted. But the sprinkle of rain or snow and mechanical damage must be avoided.
Mark
The capacitor is marked by laser print or stamp or adhesive label, With following information:
1.Rated capacitance (8.5μF)
2.Rated voltage (600V.AC)
3.Tolerance on rated capacitance (J ±5%; K ±10%)
4.Order number of this capacitor (855K601A51501)
5.Manufactured year and week (MFR/DATE)
Cautions and Warnings
(1) The capacitors have not discharge resistors between terminals, so the energy stocked in the capacitor maybe lethal, before handle capacitors please discharge through resistor. Short-circuit the capacitor is not permit.
(2) Check thickness of the connections/terminals periodically.
(3) Do not use or store capacitors in corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. In the dusty environment regular maintenance and cleaning especially of the terminals is required to avoid conductive path between phases.
(4) In case of dents of more than 5mm depth or any other mechanical damage, capacitors must not be used at all.
(5) Don't hesitate to contact us for any doubts and more detail information.
(6) Water cooling method is recommended
Technical Specifications
Capacitance
8.5μF
Capacitance Tolerance
±10% (k); Optional ±5% (J)
Reactive power
200kVar
Rated Voltage (RMS)
600V.AC
Rated Frequency
30-47kHz
Current (RMS)
500A
Current (Max)
1000A t≤1min (water cooling)
Voltage Change (Dv/Dt)
>1000V/μs
Equivalent Series Resistance (ESR)
≤1.0mΩ 10KHz
Dissipation Factor
tgδ≤0.0008 (@20℃, 10KHz)
Inductance (Ls)
≤25nH
Operating Temperature
-400C~+850C
Storage Temperature
-400C~+850C
Insulation Resistance
R×C>5000s (100V, 60S)
Lifetime Expectancy
30,000Hours
Humidity RH
0-95%
Failure Rate
≤100Fit
Reference Standard
IEC61881, IEC61071, IEC60831
Physical and Test Parameters
Test Voltage Between Terminals
1800VDC 10s
Encloser Material
Mylar tape
Internal Insulation
Epoxy resin
Dielectric Medium
Metallized polypropylene film
Max. Torque of Terminal
8 Nm
Cooling Mode
Conduction cooling
Fire Resistance
UL94-V0