high frequency high power ceramic capacitor
Small size
Light weight
Higher voltage, higher power
Good high temperature performance


Product Description:
The difference between LPF series type A and type B
A and B two kinds of appearance of capacitor, the same voltage capacity using the same ceramic chip
The ceramic surface of type A is covering a layer of insulating paint, epoxy potting process
The ceramic chip process of type B is after processing, the surface with a layer of epoxy resin Therefore, type A is relatively more light than type
Because type A is no epoxy coating, so the cooling performance is better
Because type B is insulation protection, therefore higher stress levels


Electrical Parameter:
Ceramic Dielectric: RF/PF/SF
Temperature Range: -50℃~ + 125℃
Capacitance Tolerance: ±10%
Temperature Coefficient:700(PPM/℃)
Dielectric Loss:≤8%‰~1‰
Pulse Test:100 million times Charge and discharge life


Specification table:

Material code	Dielectric	Material	Capacity	Rated voltage	Rated power	Dielectric loss	D/H A(mm)	D/H B(mm)	screw (mm)
LPF202RF	280	RF	2000PF	50KV	280KVA	≤8	82*22	87*22	M10
LPF252RF	280	RF	2500PF	40KV	280KVA	≤8	95*22	112*22	M10
LPF302RF	280	RF	3000PF	30KV	280KVA	≤8	104*22	115*22	M10
LPF402PC	320	PC	4000PF	30KV	280KVA	≤0.5%	104*22	115*22	M10
LPF502PC	320	PC	5000PF	30KV	280KVA	≤0.5%	104*22	115*22	M10
LPF602PC	320	PC	6000PF	30KV	260KVA	≤0.5%	115*22	125*22	M10
LPF802SF	850	SF	8000PF	20KV	260KVA	≤1%	95*22	115*22	M10
LPF103SF	850	SF	10000PF	15KV	260KVA	≤1%	104*22	115*22	M10
LPF203SF	850	SF	20000PF	10KV	260KVA	≤1%	120*22	130*22	M10

The above dimensions are for reference only; The actual order or agreement shall prevail. Welcome for your custom





In addition, we also provide special capacitors for accelerators, as follows

Electronic irradiation (accelerator) equipment has high requirements for high-voltage capacitors: due to limited space, the product thickness is required to be less than 25MM; EECTECH provides this product