Set Homepage|Add to Favorites
Make Your Industrial Purchase Cheaper, Faster, Easier, and Better. 
伊伊西科技（北京）有限公司
EEC TECHNOLOGY (BEIJING) CORP., LTD

  Hot Line

  +86 134 6671 4221​

P
Search
Hot Search: CK-625, CCGS, CWM-75L, TV1547, 9T94A, ITL12-1, FN1000, GM2200, DA7250, IM9500 ...
P​​​
                     
               
CURRENT LOCATION:​​​​
HOME >> Capacitors >> Ceramic Capacitor >> High power microwave capacitor >> Microwave ceramic capacitors eectech
 产品中心​TECH 
Microwave ceramic capacitors eectech

Microwave ceramic capacitors eectech

It has high temperature resistance, high pressure resistance, temperature in the range of -50 to +150, temperature change rate close to zero, and high frequency resistance. It can work for a long time at a frequency close to 20MHZ. It is the first choice for high frequency and high pressure series.

0.00
0.00
  
商品描述

It has high temperature resistance, high pressure resistance, temperature in the range of -50 to +150, temperature change rate close to zero, and high frequency resistance. It can work for a long time at a frequency close to 20MHZ. It is the first choice for high frequency and high pressure series.


Product description:
The microwave ceramic capacitor is made of NPO series ceramics after many times; it has high temperature resistance and high pressure resistance, the temperature is in the range of -50 to +150, the temperature change rate is close to zero, and it is resistant to high frequencies. Long-term operation at a frequency close to 20MHZ is the first choice for high frequency and high voltage series. Its capacity can be customized within a certain range.




(1) During transportation and storage
• Do not transport or store where the capacitor will be exposed to high temperature or high humidity.
• Do not expose to poisonous gases such as H2SO4, HCL or HNO3.
• Avoid excessive impact such as that caused by falling.


(2) During operation
• Avoid contact with electrolytes such as perspiration. Do not touch with bare hands.
• Avoid excessive impact such as that caused by falling.
• Do not apply solder to stud terminals.
• Do not re-machine the terminals.


(3) Usage
• When the capacitor is used for high-speed pulses such as with a laser, make sure that the impressed voltage (peak-to-peak volt-age) is within the capacitor’s rated specifications.
• Make sure that the capacitor is not exposed to radiant heat from cham











Previous： None
Next： None
Send Inquiry​​