Set Homepage|Add to Favorites
Make Your Industrial Purchase Cheaper, Faster, Easier, and Better. 
伊伊西科技（北京）有限公司
EEC TECHNOLOGY (BEIJING) CORP., LTD

  Hot Line

  +86 134 6671 4221​

P
Search
Hot Search: CK-625, CCGS, CWM-75L, TV1547, 9T94A, ITL12-1, FN1000, GM2200, DA7250, IM9500 ...
P​​​
                     
               
CURRENT LOCATION:​​​​
HOME >> Capacitors >> Ceramic Capacitor >> Voltage sensor/transformer/divider capacitor >> Cylindrical 10KV zero sequence transformer
 产品中心​TECH 
Cylindrical 10KV zero sequence transformer

Cylindrical 10KV zero sequence transformer

10KV zero-sequence transformer adopts the principle of capacitor voltage division and uses temperature-stable ceramic medium GC as raw material. After years of efforts, it has developed a highly reliable transformer product. Mainly suitable for 12KV pole switch, ring network cabinet and other scenarios

0.00
0.00
  
商品描述

10KV zero-sequence transformer adopts the principle of capacitor voltage division and uses temperature-stable ceramic medium GC as raw material. After years of efforts, it has developed a highly reliable transformer product. Mainly suitable for 12KV pole switch, ring network cabinet and other scenarios


Product description:
10KV zero-sequence transformer adopts the principle of capacitor voltage division and uses the temperature-stabilized ceramic medium GC as the raw material. After years of hard work by the scientific research personnel of Meizhi, it has developed a highly reliable transformer product. Mainly suitable for 12KV pole switch, ring network cabinet and other scenarios,

1. This series of products is based on the principle of capacitive voltage division. Each transformer is implanted with a set of high-voltage ceramic capacitors, which are respectively connected to three-phase high-voltage. This is Ua, Ub, Uc three-phase high-voltage input;
2. On the low voltage side, three phases are connected in parallel and then connected in series with a low voltage capacitor. Between the high voltage and low voltage capacitors is the U0 terminal of the zero sequence transformer;
3. The end of the low-voltage capacitor is directly connected to the ground wire;
4. A group of three, fixed on a metal base plate with screws;




Dimensions:
High-pressure end nut: m5
Fixing nut: m5
Low-pressure end nut: m4
Diameter: 55mm
Height: 88mm
(Note: Can be customized according to requirements, please contact EECTECH)













Send Inquiry​​