Set Homepage|Add to Favorites
Make Your Industrial Purchase Cheaper, Faster, Easier, and Better. 
伊伊西科技（北京）有限公司
EEC TECHNOLOGY (BEIJING) CORP., LTD

  Hot Line

  +86 134 6671 4221​

P
Search
Hot Search: CK-625, CCGS, CWM-75L, TV1547, 9T94A, ITL12-1, FN1000, GM2200, DA7250, IM9500 ...
P​​​
                     
               
CURRENT LOCATION:​​​​
HOME >> Capacitors >> Ceramic Capacitor >> High frequency high voltage ceramic capacitor >> Y5T material high voltage bolt capacitor
 产品中心​TECH 
Y5T material high voltage bolt capacitor

Y5T material high voltage bolt capacitor

Applications

Suitable for high frequency & high voltage power supplies;

CO2 lasers, high voltage pulse generator

X-ray equipment

NDT (Non-destructive testing)

Airport security equipment

Negative ion products / anion products


0.00
0.00
  
商品描述

Applications

Suitable for high frequency & high voltage power supplies;

CO2 lasers, high voltage pulse generator

X-ray equipment

NDT (Non-destructive testing)

Airport security equipment

Negative ion products / anion products



Features
Low dissipation factor of 0.2% at 1 KHZ
High frequency ≥550KHZ
High current ≥50mA
High voltage ≥2
High insulation resistance ≥200000MΩ
Long life ≥10 years


Applications
High frequency & high voltage power supplies;
CO2 lasers, high voltage pulse generator
X-ray equipment
NDT (Non-destructive testing)
Airport security equipment
negative ion products / anion products


Ceramic dielectric properties:


Dimension & Lead Style:



Explanationt of part numbers:


About Y5T ceramic
Y5V is a better performance of Class II General Ceramics.Its temperature variation of capacitance is within +22/-33% from -25°C to +85°C. Dissipation factor is less than 1%, insulation resistance greater than 100000MΩ.


Selection table



PRECAUTIONS
(1) During transportation and storage
• Do not transport or store where the capacitor will be exposed to high temperature or high humidity.
• Do not expose to poisonous gases such as H2SO4, HCL or HNO3.
• Avoid excessive impact such as that caused by falling.
(2) During operation
• Avoid contact with electrolytes such as perspiration. Do not touch with bare hands.
• Avoid excessive impact such as that caused by falling.
• Do not apply solder to stud terminals.
• Do not re-machine the terminals.
(3) Usage
• When the capacitor is used for high-speed pulses such as with a laser, make sure that the impressed voltage (peak-to-peak volt-age) is within the capacitor’s rated specifications.
• Make sure that the capacitor is not exposed to radiant heat from cham.













Send Inquiry​​