a height limit detection product based on stereo vision
Fatigue driving, unable to predict the height of the vehicle and the height of the height limiting device (height limiting pole, bridge cave) are the main reasons for the RV, bus and truck to hit the height limiting device. In addition to cause casualties and property losses, such accidents also bring bad social impact
Based on stereo vision, se2 can accurately detect the height of height limiting device and give the driver warning even if there is no signboard. It is especially suitable for urban and country roads.
SE2 perceive the road environment in front of the vehicle in real time. When there is a height limiting bar, tunnel or overpass that the vehicle can not pass, SE2 will send sound and visual warning to the driver to help the driver reduce the collision accidents caused by unfamiliar vehicle height or distraction.
Installation Position
![]()
Product parameters
Part 1, Stereo Camera Parameters
ITEM
parameters
Focus
8mm
Measure range
3m~60m
Baseline
300px
Dynamic range
120dB
Resolution
1280*720
FOV
HFOV38°
Transmission mode
RJ45, CAN,RS485,GPS
Voltage
9~36 V
Power
5 W
Storage temperature
-40℃~90℃
Working temperature
-40℃~90℃
Image frame rate
12.5 FPS
Part 2, Warning Display
ITEM
parameters
Screen type
IPS TFT
Contrast ratio
400cd/m2
Working voltage
5V
Resolution
240x320
Power
<1W
Storage temperature
-40℃~85℃
Working temperature
-20℃~70℃